LAUNCH X431 CR3001 EOBD OBD2 Car Reader Multilingual Auto Scanner Scan Diagnostic Tool Check Engine DTC Lookup Free Update

Why Choose LAUNCH CR3001 Scanner for your car?

As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on.

However, Most of them don’t know that they can use very little money – using LAUNCH CR3001 obdii code scanner.

This code reader could resolve most reasons which caused engine light on, and tell you what’s wrong with your car engine, and if it is necessary to be sent to workshop. Altogether, the LAUNCH CR3001 car diagnostic scan tool would save you much time and money.

It is also a great choice if you are looking for an obd scanner well-built, easy-use with wide vehicle coverage.

LAUNCH reader 3001 obd2 scanner Supports O2 Sensor test , EVAP system test, On-Board monitor test, While AD310 and AL319 DOES NOT !

LAUNCH CR3001 Add more car models , including cars, SUVs, minivans ,light-duty trucks all over the world. But the year supported may vary on different car makes and models.

Turn Off ”Check Engine” Light:

LAUNCH CR3001 obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU).

The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts might cause your check engine light on include:
1. Gas Cap
2. Oxygen Sensor
3. Air Fuel Ratio Sensor
4. Mass Air Flow Sensor
5. Ignition Coils
6. Spark Plug Wires
7. Spark Plugs
8. Thermostat
9. EGR Valve
10. Evaporative Emission Canister Purge Valve(EVAP)
11. Catalytic Converter.

LAUNCH CR3001 obdii code reader will read codes indicating these fault parts. After the car problems have been solved, LAUNCH CR3001 car code reader can erase these trouble codes and turn off check engine light.

If the engine light is not turned off in time
it will Cause Serious environmental pollution , Increased fuel consumption, Increased engine noise. Increased in temperature , etc

Launch Creader 3001 compared to other similar products

LAUNCH Creader 3001 OBD2 scanner is a very Cost-efficient full OBD2 function scanner on the market (the same functions need 40 ). Unlike other car code readers, Launch Creader 3001 is an all in one car code scanning tool.

An upgraded version from the more basic code reader with additional functions. It is designed for car owners, DIYers as well as mechanics to determine the cause and solve the problem.

LAUNCH CR3001 Support Full OBD2 functions, Engine Check including:

Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs).

Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

LAUNCH CR3001 Screen Display:

Easy to Carry and User-friendly:

The OBD2 scanner’s mini size fits comfortably in the palm of your hand. so that you can carry it around no matter in garage or on a trip.

We provide free online upgrade for LAUNCH CR3001

If the product displays a white screen or cannot support your car, you can solve it by upgrading

Support update system :compatible with Windows XP, Windows 7, Windows 8 & Windows 10

Step 1 : Go to LAUNCH Website : https://eninfo.x431.com/ , to download Update tool

Step 2 : Install the update tool in your company

Step 3 : Connect CR3001 with computer , then Click Update button to Update .

If you still do not know how to do , pls check the update video in the following.

How to verify whether the vehicle will pass the emission test with this code reader?

Support Car Models for OBDII diagnostic function:

(Note: CR3001only Support 12V Gasoline& Diesel, Does not support 24V Truck)

American Car :
Need Standard OBD2 Protocols from 2000 to now
for Chrysler , for Ford, for GM, For Jeep

European Car :
Need Standard OBD2 Protocols from 2003 to now
For Alfa romeo , for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Renault
For Bentley , for Skoda , for Daewoo , for Benz , for Daihatsu , for Land Rover , for BMW , for Vauxhall , for Citroen , for Volvo , for Fiat , for VW , for Ford , for Jaguar…

Japanese/Korean Car:
Need Standard OBD2 Protocols from 2006 to now
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota..

Chinese Car:
Need Standard OBD2 Protocols from 2009 to now